Vulcan CBFT Bedienungsanleitung PDF herunterladen (Seite 5)

F-47102 (06-14) CBFT SERIES

4

ELECTRICAL REQUIREMENTS

ELECTRICAL CODES & STANDARDS:

The cabinet must be installed in

accordance with:

In the United States of America:

1. State and Local Codes.

2. National Electrical Code, ANSI/

NFPA-70 (latest edition.) Copies

may be obtained from: The

National Fire Protection

Association, 1Batterymarch Park,

Quincy, MA 02269.

1-617-770-3000 www.nfpa.org

In Canada:

1. Local Codes.

2. Canadian Electrical Code, CSA

C22.1 (latest edition.) Copies

may be obtained from: The

Canadian Standard Association.

www.csa.ca

ELECTRICAL CONNECTIONS:

The cabinet is factory wired for 120 volt

single phase operation. The cabinet is

equipped with an 8 foot cord and a

NEMA 5-15 plug as standard

equipment. Refer to wiring diagrams in

the back of this manual.

The cord and plug supplied is a suitable

durable cord with a molded three-prong

plug, and is provided with a heavy-duty

strain relief.

All cabinets are

equipped with a three-prong plug. It

is imperative that this plug must be

connected into a properly grounded

three-prong receptacle. If the

receptacle is not the proper

grounding type, contact an

electrician. Do not remove the

grounding prong from this plug.

Verify that the power source matches

the Serial Data Plate located on the

lower back corner of the cabinet and

the plug configuration before the

connection is made. (Fig.1)

SERIAL DATA PLATE

(Fig.1)

1 2 3 4 5 6 7 8 9 10 ... 19 20

Kommentare zu diesen Handbüchern

Keine Kommentare